Ernie Ball, creators of Paradigm, the company’s new ultra-durable guitar strings, have shared a few tips on the best ways to prevent string breakage.
While some methods are obvious (keeping your strings clean might be a no-brainer), E.B. offers some useful tips to help prolong string life and keep them sounding and feeling fresh. It’s a quick read that might ultimately save you a few bucks, or prevent an embarrassing mid-performance string break.
Whether the tuning machines on your instrument are locking or standard, it’s best to allow for at least 3/4 of a turn around the tuner post so that the string’s tension does not terminate at a kink. When wire is kinked, it puts the string at a disadvantage and weakens the wire at that point, which makes strings more prone to breakage. This translates to less risk of breaking strings, whether its from heavy bends or transitioning between alternate tunings.
Saddles are especially prone to developing burrs, which can damage strings causing them to break sooner than they should. A bridge saddle should serve as a smooth point of transition, but over the course of use these metal surfaces can develop burrs, oxidation, and other imperfections. This affects not only string longevity; it also affects tuning.
Unless you have a solid amount of experience, it is recommended to let a professional luthier or tech take care of any repairs or maintenance on your guitar’s saddles. Improper filing or sanding could result in permanent damage to the saddles, bridge or guitar.
Similar to saddles, nut slots should serve as a smooth point of transition, but over the course of use this surface can be a point of binding can lead to shortened string life as well as sub-optimal tuning. Binding can cause string tensions between the nut and tuner to be greater than south of the nut, which places excessive stresses on the string at the tuner post. Make sure the slots are sized appropriately for the strings you’re using. Also, make sure the slots are smooth. Nut lubricant is always a good tool to use to make sure that strings aren’t binding in the nut slots.
Similarly to saddles, unless you have a solid amount of experience, it is recommended to let a professional luthier or tech take care of any repairs or maintenance on your guitar’s nut. Improper filing or sanding could result in permanent damage to the nut, fretboard or guitar.
#4: String Cleanliness
A clean string is a happy string. Just a few moments spent cleaning strings after use can save you plenty of trips to the store and money spent on strings. A simple wipe down with a polish cloth does a great job, but the best job is done using a string cleaner such as Ernie Ball Wonder Wipes to adequately penetrate all of the windings and crevices, removing that pesky finger cheese that robs tone and causes strings to oxidize. No one wants to be stuck playing strings that smell like an old penny jar or yesterday’s Del Taco leftovers. Plus, if your strings stink, then your fingers will probably stink after playing too.
Check out these images of a string before and after using Ernie Ball Wonder Wipes String Cleaner:
The type of guitar pick that you’re using, in addition to the condition of the pick, can also be a factor in string breakage. If you’re playing with particularly heavy picks, especially if they’ve been worn down to a sharp edge, you could be damaging your strings with every pluck or strum. Be sure to occasionally check the condition of your picks; much the same way you don’t want to drive a car with a flat tire, playing a guitar with a pick that’s worn out could result in unwanted trouble.
#6: String Stretching
Properly stretching a new set of strings is a good idea not only to ensure tuning stability, it also helps your strings settle into their nut and saddle slots properly. This in turn cuts down on the likelihood that your strings will break due to friction or a sharp edge.
Keep in mind, more is not always better when it comes to string stretching. The goal is to stretch your strings enough so that they settle to pitch, but overshooting can cause strings to actually break or sound dull more quickly.