MXR phase 95

The 45/90 switch toggles between the Phase 45 mode’s subtle two-stage phasing and the Phase 90 mode’s more pronounced four-stage phasing, while the Script switch toggles between two phasing styles. The Phase 95 is set to modern style phasing by default, which relies on feedback to create light harmonic distortion and gives the effect a more accentuated swoosh. Engaging the Script switch removes feedback for a lusher, more subdued sound with higher headroom and greater clarity. The familiar Speed control sets the rate of the effect. The Phase 95 may be small, but it’s full of rich phase tones, and it’ll take a beating on the road.

The MXR Phase 95 combines two iconic
phase circuits into a single mini housing:
the two-stage Phase 45 and the four-stage Phase 90. The 45/90 switch toggles between the two, while the Script switch removes feedback for a subtler vintage sound.

DIRECTIONS
Run a cable from your guitar to the M290’s INPUT jack and run another cable from the M290’s OUTPUT jack to your ampli er. Set SPEED knob to its
12 o’clock position.
Turn the effect on by depressing the footswitch.
Push the 45/95 switch to
select desired phaser mode: Phase 45 (red LED) or
Phase 90 (blue LED).
Rotate the SPEED knob clockwise to increase rate of effect or counterclockwise
to decrease it.
Engage the SCRIPT switch for a subtler vintage sound, indicated by amber LED.

POWER
The Phase 95 is powered by the included Dunlop ECB003 9-volt adapter or the DC BrickTM and Iso-Brick power supplies.