DESCRIPTION
• Combines La Machine Fuzz with old school Sub-Octave signal
• Separate volume levels for Fuzz and Sub-Octave signals
• Toggle between Series/Parallel modes
• Octave switch kicks Fuzz signal into Octave Up modePOWER
The Sub Machine Fuzz is powered by one 9-volt battery (remove bottom plate to install), a 9-volt AC adapter such as the Dunlop ECB003/ECB003EU, or the
DIRECTIONS
• Run a cable from your guitar to the M225’s INPUT jack and run another cable from the M225’s OUTPUT jack to your ampli er.
• Turn the e ect on by depressing the BYPASS footswitch.
• Start with all controls at 12 o’clock.
• Rotate SUB control clockwise to increase volume of Sub-Octave signal or counterclockwise to decrease it.
• To engage the Fuzz signal’s Octave Up mode, depress the OCTAVE footswitch.
• Rotate VOLUME control clockwise to increase volume offuzz signal or counterclockwise to decrease it.
• Rotate TONE control clockwise for a warmer fuzz sound or counterclockwise for a brighter fuzz sound.
• Rotate FUZZ control clockwise to increase amount of fuzz or counterclockwise to decrease it.
• Pushing the SERIES switch toggles between Parallel mode (switch OUT)—which runs the Sub-Octave and Fuzz signals independently of each other— to Series mode (switch IN, indicated by yellow LED), which runs the Sub-Octave signal into the Fuzz signal.